AC plasma torch with a H sub(2)O/CO sub(2)/CH sub( 4) mix as the working gas for methane reforming
This paper presents results of investigations implemented during construction of the three-phase ac plasma torch working on a mixture of steam with carbon dioxide and methane (H sub(2)O/CO sub(2)/CH sub(4)) with power upto 120 kW. Such thermal plasma generators are needed in industrial technologies...
Gespeichert in:
Veröffentlicht in: | Journal of physics. D, Applied physics Applied physics, 2015-06, Vol.48 (24), p.1-12 |
---|---|
Hauptverfasser: | , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | This paper presents results of investigations implemented during construction of the three-phase ac plasma torch working on a mixture of steam with carbon dioxide and methane (H sub(2)O/CO sub(2)/CH sub(4)) with power upto 120 kW. Such thermal plasma generators are needed in industrial technologies for methane reforming with the aim of producing the syngas comprising of the hydrogen and carbon mono-oxide (H sub(2)/CO). It was shown that during plasma torch work there are two character parts of the high-voltage arc. In these parts, the arc column has a different diameter and temperature about (8.5 - 8.3) times 10 super(3) K and (10.5 - 10.0) times 10 super(3) K, respectively. The plasma torch output characteristics have been obtained for working regimes with various flow rates of the methane (0.0-0.8 g s super(-1)) in the plasma-forming mix and constant flow rates of the carbon dioxide and water steam (each of 3.0 g s super(-1)). For the mentioned mix of gases, the unit generates plasma with the mass-average temperature ~(3.2-3.3) times 10 super(3)K and the thermal efficiency ~94-96%. This provides effective reforming of methane. |
---|---|
ISSN: | 0022-3727 1361-6463 |
DOI: | 10.1088/0022-3727/48/24/245204 |