Evaluation of In-Service Performance of Tom's Creek Bridge Fiber-Reinforced Polymer Superstructure

The Tom's Creek Bridge is a small-scale demonstration project involving the use of fiber-reinforced polymer (FRP) composite girders as the main load-carrying members. The project is intended to serve two purposes. First, by calculating bridge design parameters such as the dynamic load allowance, transverse wheel load distribution, and deflections under service loading, the Tom's Creek Bridge aids in modifying current American Association of State Highway and Transportation Officials bridge design standards for use with FRP composite materials. Second, by evaluating the FRP girders after exposure to service conditions, the project begins to answer questions about the long-term performance of these advanced composite material beams when used in bridge design. This paper details the in-service analysis of the Tom's Creek Bridge. Five load tests, at 6-month intervals, were conducted on the bridge. Using midspan strain and deflection data gathered from the FRP composite girders during these tests, the aforementioned bridge design parameters have been determined. The Tom's Creek Bridge was determined to have a maximum dynamic load allowance, IM, of 0.90, a transverse wheel load distribution factor, g, of 0.101, and a maximum deflection of L/490. Two bridge girders were removed from the Tom's Creek Bridge after 15 months of service loading. These FRP composite girders were tested at the Structures and Materials Research Laboratory at Virginia Tech for stiffness and ultimate strength and compared to preservice values for the same beams. These measurements indicate that, after 15 months of service, the FRP composite girders have not significantly changed in stiffness or ultimate moment capacity.