In vivo degradation and biocompatibility study of in vitro pre-degraded as-polymerized polylactide particles
The degradation of high molecular weight as-polymerized poly( l-lactide) (PLLA) is very slow; it takes more than 5.6 yr for total resorption. Moreover, the degradation products of as-polymerized PLLA bone plates, consisting of numerous stable particles of high crystallinity, are related with a subcu...
Gespeichert in:
Veröffentlicht in: | Biomaterials 1995-03, Vol.16 (4), p.267-274 |
---|---|
Hauptverfasser: | , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | The degradation of high molecular weight as-polymerized poly(
l-lactide) (PLLA) is very slow; it takes more than 5.6 yr for total resorption. Moreover, the degradation products of as-polymerized PLLA bone plates, consisting of numerous stable particles of high crystallinity, are related with a subcutaneous swelling in patients 3 yr postoperatively. In order to avoid these complications, polymers were developed that are anticipated to have comparable mechanical properties but a higher degradation rate and do not degrade into highly stable particles that can induce a subcutaneous swelling. On chemical grounds it can be expected that copolymerization of PLLA with 4%
d-lactide (PLA96) or by modifying PLLA through cross-linking (CL-PLLA) will lead to less stable particles and a higher degradation rate. To evaluate the long-term suitability of these as-polymerized polymers, the biocompatibility of the degradation products should be studied. Considering the very slow degradation rate of as-polymerized PLLA,
in vitro pre-degradation at elevated temperatures was used to shorten the
in vivo follow-up periods. In this study, the biocompatibility and degradation of as-polymerized PLLA, PLA96 and CL-PLLA were investigated by implanting pre-degraded particulate materials subcutaneously in rats. Animals were killed after a postoperative period varying from 3 to 80 wk. Light and electron microscopical analysis and quantitative measurements were performed. The histological response of all three pre-degraded materials showed a good similarity with
in vivo implanted material. Pre-degraded PLLA induced a mild foreign body reaction and showed a slow degradation rate. PLA96 and CL-PLLA had a substantially lower crystallinity, a smaller mean particle size and an enhanced degradation rate compared to PLLA. Based on the chemical and quantitative analysis, the degradation of PLA96 and CL-PLLA was much more enhanced and thus more favourable than the degradation of PLLA. |
---|---|
ISSN: | 0142-9612 1878-5905 |
DOI: | 10.1016/0142-9612(95)93253-A |