Recycling ground granulated blast furnace slag as cold bonded artificial aggregate partially used in self-compacting concrete

► Artificial slag aggregates (ASA) were produced via cold bonding pelletization technique. ► Natural coarse aggregates were replaced with ASA in making self compacting concrete (SCC). ► Fresh properties of SCC were evaluated in terms of flowability, viscosity and passing ability. ► ASA was proved to be suitable for utilization in production of SCC. ► SCC characteristics appeared to improve as ASA was used. Ground granulated blast furnace slag (GGBFS), a by-product from iron industry, was recycled as artificial coarse aggregate through cold bonding pelletization process. The artificial slag aggregates (ASA) replaced partially the natural coarse aggregates in production of self-compacting concrete (SCC). Moreover, as being one of the most widely used mineral admixtures in concrete industry, fly ash (FA) was incorporated as a part of total binder content to impart desired fluidity to SCCs. A total of six concrete mixtures having various ASA replacement levels (0%, 20%, 40%, 60%, and 100%) were designed with a water-to-binder (w/b) ratio of 0.32. Fresh properties of self-compacting concretes (SCC) were observed through slump flow time, flow diameter, V-funnel flow time, and L-box filling height ratio. Compressive strength of hardened SCCs was also determined at 28 days of curing. It was observed that increasing the replacement level of ASA resulted in decrease in the amount of superplasticizer to achieve a constant slump flow diameter. Moreover, passing ability and viscosity of SCC's enhanced with increasing the amount of ASA in the concrete. The maximum compressive strength was achieved for the SCC having 60% ASA replacement.