Spray and combustion characteristics of gasoline and diesel in a direct injection compression ignition engine
► Spray and combustion characteristics were investigated for gasoline and diesel. ► Similar liquid penetration length between two fuels under non-evaporating condition. ► Shorter liquid length and narrower spray angle for gasoline at evaporating condition. ► Premixed-dominant combustion with blue ch...
Gespeichert in:
Veröffentlicht in: | Fuel (Guildford) 2013-07, Vol.109, p.616-626 |
---|---|
Hauptverfasser: | , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | ► Spray and combustion characteristics were investigated for gasoline and diesel. ► Similar liquid penetration length between two fuels under non-evaporating condition. ► Shorter liquid length and narrower spray angle for gasoline at evaporating condition. ► Premixed-dominant combustion with blue chemiluminescence for gasoline. ► Diffusion-dominant combustion with highly luminous soot incandescence for diesel.
The spray and combustion characteristics of gasoline and diesel were investigated in a direct injection compression ignition engine equipped with a common rail injection system. The spray evolution was observed under a non-evaporating condition in a constant volume chamber and under an evaporating condition in an optical engine. Under the non-evaporating condition, the liquid penetration length was similar between the gasoline and diesel. The gasoline spray exhibited a relatively larger spray cone angle than that of diesel spray. However, the gasoline spray exhibited a significantly shorter liquid penetration length and narrower spray angle than that of the diesel spray under the evaporating condition. The maximum liquid penetration length was maintained constant regardless of the injection pressure for each fuel at the evaporating condition. The diesel spray formed wall wetting through the fuel impingement on the combustion chamber due to the long liquid penetration length at an early injection timing of −32 crank angle degree after top dead center (CAD ATDC).
A series of combustion experiments was performed in order to investigate the performance and emissions in a metal engine and the flame characteristics in an optical engine. A low load condition (indicated mean effective pressure (IMEP) of approximately 0.45MPa) was tested under an injection timing range from −40 to 0 CAD ATDC. The maximum thermal efficiency was similar between the two fuels with injection in close vicinity of the TDC. The gasoline combustion created a larger amount of hydrocarbon, carbon monoxide, and comparable nitric oxides (NOx) but had a lower soot emission compared with diesel combustion. However, the NOx emission of the gasoline combustion was significantly reduced with the premixed charge compression ignition (PCCI) combustion via early injection. The direct combustion visualization demonstrated that the natural luminosity (NL) of the gasoline combustion was dominated by the chemiluminescence from the premixed burn while the NL of the diesel combustion was primarily att |
---|---|
ISSN: | 0016-2361 1873-7153 |
DOI: | 10.1016/j.fuel.2013.02.060 |