Surface Roughness after Machining and Influence of Feed Rate on Process

The aim of the work is find out influence of feed rate on the quality for the machined surface, especially surface roughness. The experiment was carried out by cutting tool HURCO VMXt30 with respect to the following cutting parameter: cutting speed 250; 350; 450; 550 and 850 m.min-1, feed 0,1; 0,5 and 1,0 mm/tooth. For testing was used two most common materials in the steel grade 1.1191 (12 050) and 1.2343 (19 552), and we chose two ordinary parameters of surface roughness; Ra - arithmetical mean roughness deviation and Rz - the largest inequalities height profile in the transverse direction and the longitudinal direction of machining. The structural equations will be the result which can describe the character depending on the cut surface parameters.