Properties of (Low-density polyethylene)/(natural rubber)/(water hyacinth fiber) composites: The effect of polyaniline

The effects of polyaniline (PANI)‐modified water hyacinth fiber on the properties of (low‐density polyethylene)/(natural rubber)/(water hyacinth fiber) (LDPE/NR/WHF) composites were studied. The composites were prepared by using a Brabender Plasticorder at 160oC and a rotor speed of 50 rpm for 6 min...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Journal of vinyl & additive technology 2014-06, Vol.20 (2), p.122-130
Hauptverfasser: Supri, A.G., Tan, S.J., Ismail, H., Teh, P.L.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The effects of polyaniline (PANI)‐modified water hyacinth fiber on the properties of (low‐density polyethylene)/(natural rubber)/(water hyacinth fiber) (LDPE/NR/WHF) composites were studied. The composites were prepared by using a Brabender Plasticorder at 160oC and a rotor speed of 50 rpm for 6 minutes. LDPE/NR/WHFPANI composites exhibited higher tensile strength, Young's modulus, elongation at break, melting temperature, and electrical conductivity but lower molar sorption, capacitance, percentage crystallinity, and interparticle spacing than LDPE/NR/WHF composites. Scanning electron microscopy morphology showed a better interfacial adhesion of PANI‐modified water hyacinth fiber (WHFPANI) and the LDPE/NR phases than when unmodified WHF was used. J. VINYL ADDIT. TECHNOL., 20:122–130, 2014. © 2014 Society of Plastics Engineers
ISSN:1083-5601
1548-0585
DOI:10.1002/vnl.21332