On the alignment of fluid-dynamic principal strain-rates with the 3D flamelet-normal in a premixed turbulent V-flame

Statistics of the alignment of fluid-dynamic principal strain-rates and the local flamelet-normal in a premixed turbulent V-flame (methane-air, Ret=450, φ=0.8) were measured experimentally using simultaneous stereoscopic particle image velocimetry (SPIV) and planar laser-induced fluorescence of OH (...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Proceedings of the Combustion Institute 2015-01, Vol.35 (2), p.1269-1276
Hauptverfasser: Sponfeldner, T., Boxx, I., Beyrau, F., Hardalupas, Y., Meier, W., Taylor, A.M.K.P.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Statistics of the alignment of fluid-dynamic principal strain-rates and the local flamelet-normal in a premixed turbulent V-flame (methane-air, Ret=450, φ=0.8) were measured experimentally using simultaneous stereoscopic particle image velocimetry (SPIV) and planar laser-induced fluorescence of OH (OH-PLIF). The use of a second OH-PLIF sheet, oriented in a crossed-plane imaging configuration enabled conditioning of the statistics with respect to through-plane flame orientation. The statistics show the geometric alignment changes significantly with the distance between the flame and the location where the strain-rate field is evaluated. It was observed that approximately 30η upstream of the flame, the fluid-dynamic principal strain-rates show no preferential alignment with the flamelet. With increasing proximity to the flame, the most extensive principal strain-rate is observed to align preferentially perpendicular to the local flamelet-normal. In the immediate vicinity of the flame, where local fluid-dynamics are dominated by dilatation, the principal extensive strain-rate is observed to align preferentially parallel to the local flamelet-normal. The realignment of the principal strain-rates in the immediate vicinity of the flame is clearly the result of local flow acceleration caused by heat-release at the reaction zone. As the most extensive principal strain-rate tends to align preferentially perpendicular to the local flamelet-normal outside the region of heat-release, the data indicate that high scalar gradients observed ahead of the flamelet are produced by the local turbulent flow-field, rather than destroyed by it.
ISSN:1540-7489
1873-2704
DOI:10.1016/j.proci.2014.06.082