High tap-density and high performance LiFePO4/C cathode material synthesized by the combined sol spray-drying and liquid nitrogen quenching method

The cathode material LiFePO4/C is synthesized by a combined sol spray-drying and liquid nitrogen quenching method. Combining the advantages of sol–gel, spray-drying, and quenching, the well crystallized LiFePO4/C sample possesses both high tap-density and excellent electrochemical performance. The sphere-like particles are of the size 0.1–6μm, and the tap-density is as high as 1.53gcm−3. TEM results show that there are a number of defects in LiFePO4 crystals, and a uniform carbon layer (∼2nm) exists on the LiFePO4 grain surface. Electrochemical tests reveal that quenching can greatly improve the rate capability and cycle performance of LiFePO4/C. The quenched sample shows the initial discharge capacities of 162.5, 154.7 and 117.8mAhg−1 at 0.1C, 1C and 10C rate, respectively, and after the cell cycled 110 times at different rates, the capacity can recover to 99.4% of its original value when the rate reverses back to 0.1C. ► A sol spray-drying and liquid nitrogen combined route is used to prepare LiFePO4/C. ► Sphere-like LiFePO4/C powders exhibit a high tap-density of 1.53gcm−3. ► Quenched LiFePO4/C shows excellent rate and cycle performances.