Influence of the heat storage size on the plant performance in a Smart User case study

[Display omitted] ► Performance analysis of a stand-alone Smart User case study. ► Different storage sizes based on average heat consumptions and productions. ► Traditional CHP sizing compared to Smart User stand-alone system. ► A thermal storage of 10.7m3 reduces the auxiliary heater contribution o...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Applied energy 2013-12, Vol.112, p.1454-1465
Hauptverfasser: Chesi, Andrea, Ferrara, Giovanni, Ferrari, Lorenzo, Magnani, Sandro, Tarani, Fabio
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:[Display omitted] ► Performance analysis of a stand-alone Smart User case study. ► Different storage sizes based on average heat consumptions and productions. ► Traditional CHP sizing compared to Smart User stand-alone system. ► A thermal storage of 10.7m3 reduces the auxiliary heater contribution of 33%. ► A thermal storage of 10.7m3 reduces primary energy consumptions of 12%. The increasing diffusion of renewable energy sources are posing new challenges to the power grid due to their intrinsic unpredictability causing poor power quality, line congestion and unreliable and unsecure grid operations. In the future, power grid operators may require to the customers/producers a prescribed exchange profile, leading to a diffusion of storage systems or prime movers (especially small combined heat and power for distributed resources) able to balance renewable sources fluctuations. In this latter case, one of the major issue is the efficient use of the heat co-generated: the adoption of thermal storages appears to be necessary. In this paper, the energy performance of a Smart User, i.e. a dwelling with renewable energy sources, a combined cooling, heat, and power system, and heat and cooling back-up generators, is estimated by means of a purposely developed TRNSYS unsteady model. A virtual stand-alone operating condition is imposed for the analysed building as an arbitrary profile of power exchange with the grid. The balancing of renewable sources fluctuations imposes a non-negligible part of the heat from the prime mover to be wasted and a sensible consumption for auxiliary devices (i.e. the auxiliary boiler and the compression chiller). By applying a thermal storage, and increasing its capacity, the fraction of heat wasted and the supply from other devices is remarkably changed, showing different plant performance and efficiencies. The Smart User primary energy consumptions of the different configurations are compared to several options, showing appreciable differences in the performance.
ISSN:0306-2619
1872-9118
DOI:10.1016/j.apenergy.2013.01.089