Shear bond strength of porcelain to a new millable alloy and a conventional castable alloy

Abstract Statement of problem A recently introduced presintered cobalt-chromium (Co-Cr) alloy for metal ceramic restorations can be efficiently processed with computer-aided design/computer-aided manufacturing (CAD/CAM) techniques. However, little or no reliable study data are available regarding the bonding ability of porcelain to milled Co-Cr alloys. Purpose The purpose of this study was to evaluate the shear bond strength of veneering porcelain to the presintered Co-Cr alloy and to a conventional castable alloy. Material and methods Ninety-six cylindrical cores (6.8 mm in diameter, 9 mm in height) were made of millable alloy (Ceramill Sintron) and castable alloy (4-all) by means of CAD/CAM or casting, 48 cores for each alloy. Four types of veneering porcelain were fired or pressed to the cores; these specimens had dimensions of 4×4×3 mm. After firing, the specimens were put in resin molds, fixed in a universal testing machine, and subjected to a shear force test. Loading was applied to each specimen through the attached crosshead at a constant drive speed of 0.5 mm/min until fracture occurred. Shear bond strengths (MPa) were calculated by dividing the maximum failure force over the cross-sectional area of each specimen. Failure patterns of the specimens were also investigated and characterized as adhesive, cohesive, or mixed. One-way ANOVA and the Duncan post hoc test were used to analyze statistically significant differences between groups (α=.05). Results The means of the shear bond strengths of (millable) Ceramill Sintron were similar to or higher than those of (castable) 4-all cores. The shear bond strength was significantly lower for Press-To-Metal veneer than for the other fired veneers in the test ( P