The Influence of WEDM parameters on Material Removal Rate of Tungsten Carbide

The Influence of WEDM parameters on Material Removal Rate of Tungsten Carbide

This paper aims to study the effects of various operational parameters like pulse on time (Ton), pulse off time (Toff), servo voltage (SV) and peak current (IP) on material removal rate (MRR) of Tungsten carbide by Wire Electrical Discharge machining. It is found that, as Ton increases, the material...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:International Journal of Advanced Engineering and Science 2014-11, Vol.3 (2), p.1-1
Hauptverfasser: Ramesh, Nallavelli, Kp, Harsha Vardhan
Format: Artikel
Sprache:eng
Schlagworte:
Electric discharge machining
Electric potential
Electric wire
Material removal rate (machining)
Servomechanisms
Tungsten carbide
Voltage
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:This paper aims to study the effects of various operational parameters like pulse on time (Ton), pulse off time (Toff), servo voltage (SV) and peak current (IP) on material removal rate (MRR) of Tungsten carbide by Wire Electrical Discharge machining. It is found that, as Ton increases, the material removal rate increases, Toff increases material removal rate decreases, SV increases material removal rate decreases, and IP increases material removal rate increases.
ISSN:2304-7712
2304-7720