Study on a new method for installing a monopile and a fully integrated offshore wind turbine structure

This paper presents a preliminary technical feasibility study on a new methodology proposed for installing a monopile-based bottom supported offshore wind turbine structure. The concept is developed to address the problem of “waiting for a suitable weather window” which is commonly faced by the existing installation methods that uses a typical jack-up platform. In the methodology, a floating vessel along with a floatable subsea structure fitted with a hull on the top, hereafter named SSIP (subsea structure for installing a pile), is proposed first to install a monopile. Then the same structure is used to carry an FIUS (fully integrated upper structure) of an offshore wind turbine, which is characterized by a telescopic tower, and install it over the monopile by using an FOP (float-over-pulling) arrangement. Here, the installation methodologies are first briefly described along with the critical load cases associated with them. These load cases are then numerically studied for a significant wave height (HS) of 2.5 m, and the results are summarized. For installing a fully integrated offshore wind turbine upper structure on a monopile foundation by the FOP method, two installation schemes are presented, and their dynamic characteristics are compared. It is shown that the proposed methodologies have potential to provide installation solutions which can be environmentally more robust compared to the existing method for installing an offshore wind turbine. •In this revision, all comments received from the reviewers are addressed.•A separate file is added describing the replies/actions taken on each comment.•Appendix D is added to summarize the hydrodynamic coefficients used for studying the structure.