W-Band OFDM for Radio-over-Fiber Direct-Detection Link Enabled by Frequency Nonupling Optical Up-Conversion
A system involving W-band (75-110 GHz) optical millimeter (mm)-wave generation using the external optical modulator (EOM) in a radio-over-fiber (RoF) link is presented for satisfying the requirements for multi-gigabit-per-second data rates. A 90-GHz mm-wave signal was generated by a nonupling (nine...
Gespeichert in:
Veröffentlicht in: | IEEE photonics journal 2014-12, Vol.6 (6), p.1-7 |
---|---|
Hauptverfasser: | , , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | A system involving W-band (75-110 GHz) optical millimeter (mm)-wave generation using the external optical modulator (EOM) in a radio-over-fiber (RoF) link is presented for satisfying the requirements for multi-gigabit-per-second data rates. A 90-GHz mm-wave signal was generated by a nonupling (nine times) increase in only a 10-GHz local oscillator by biasing the EOM at its zero level and choosing an appropriate modulation index. To achieve a fast transmission speed wirelessly, high spectral efficiency (SE), and better transmission performance, orthogonal frequency-division multiplexing (OFDM) is used. The bit error rate (BER) and error vector magnitude (EVM) of the system were measured for three different fiber lengths and for a wireless distance of 1-5 m. The results show that the system with the SE of ~4 (b/s)/Hz and 16-ary quadrature amplitude modulation (QAM) 40-GB/s OFDM signals can be received by the end user with BER less than 3.8 × 10 -3 and EVM less than 25% over a 50-km optical fiber and 3-m wireless link. |
---|---|
ISSN: | 1943-0655 1943-0647 |
DOI: | 10.1109/JPHOT.2014.2366166 |