Control of off-gassing rates of methyl isothiocyanate from the application of metam-sodium by chemigation and shank injection

Fumigants are used to enhance the yield and quality of agricultural produce, which is critical to the maintenance of the production levels of carrots, potatoes, tomatoes, strawberries, melons, and many other crops grown in the US and throughout much of the world. With the worldwide phase-out of methyl bromide in progress, the continued availability of the remaining alternatives, such as metam-sodium, 1,3-dichloropropene, and chloropicrin, is becoming increasingly important. Metam-sodium has been used for over 40 years and is the second most widely used fumigant in the United States. Reduction in off-gassing rates of fumigants can promote health and safety benefits and an increased dose in the treatment zone, thereby increasing the potential efficacy of these products. On this basis, there is a need to evaluate off-gassing rates as a function of application and sealing methods. This paper summarizes recent research into the volatilization of the principal transformation product of metam-sodium, i.e., methyl isothiocyanate (MITC), into the atmosphere as a function of application and sealing methods. Seven field studies were conducted from 1999–2001 to evaluate the off-gassing rates of MITC from applications of metam-sodium by shank injection and chemigation using two different water sealing methods, i.e., standard water sealing and intermittent water sealing. MITC is slightly soluble in water. Irrigation of a field following an application helps to retain the compound in the soil, minimizing off-gassing while increasing the dose to the target pests. Intermittent water sealing involves applying water on an intermittent basis to minimize off-gassing rates during nighttime periods when relatively poor atmospheric dispersion conditions often occur. Research conducted by the Metam-Sodium TASK Force indicates that intermittent water sealing significantly reduces off-gassing rates both for shank injection and chemigation applications when compared with standard water sealing practices.