Shale gas potential of the major marine shale formations in the Upper Yangtze Platform, South China, Part II: Methane sorption capacity

•High-pressure methane sorption isotherms were measured on Chinese shale samples.•The maximum methane excess sorption and Langmuir sorption capacity were revealed.•TOC is the primary controlling factor on methane sorption capacity.•Clay content shows positive effect on TOC-normalized sorption capaci...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Fuel (Guildford) 2014-08, Vol.129, p.204-218
Hauptverfasser: Tan, Jingqiang, Weniger, Philipp, Krooss, Bernhard, Merkel, Alexej, Horsfield, Brian, Zhang, Jinchuan, Boreham, Christopher J., Graas, Ger van, Tocher, Bruce Alastair
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:•High-pressure methane sorption isotherms were measured on Chinese shale samples.•The maximum methane excess sorption and Langmuir sorption capacity were revealed.•TOC is the primary controlling factor on methane sorption capacity.•Clay content shows positive effect on TOC-normalized sorption capacity values.•Tvap-GC results show negative effect of weathering on methane sorption capacity. The marine black shale formations on the Upper Yangtze Platform (UYP), South China are exploration targets for shale gas. Here, we report on the methane sorption capacity of thermally overmature samples from the Lower Silurian and Lower Cambrian black shale intervals in the UYP (UYP-samples). Two immature shale samples from the Middle Cambrian formation in the Georgina Basin, North Australia (AU samples) were also tested to investigate the effect of thermal maturity on sorption isotherms. Excess sorption isotherms were performed over a pressure range of 0–25MPa at 46°C. The effects of TOC content, thermal maturity, clay minerals, moisture content, pore properties, particle size, temperature, and pressure on methane sorption capacity were analysed. In addition, thermovaporisation gas chromatography (Tvap-GC) was used to measure the residual gas that is stored in the samples under atmospheric pressure and temperature conditions. The results indicate that the maximum methane excess sorption of the Lower Silurian samples is between 0.045 and 0.064mmol/g rock and that of Lower Cambrian samples is between 0.036 and 0.210mmol/g rock. The Langmuir sorption capacity of the Lower Silurian samples ranges from 0.096 to 0.115mmol/g rock, whereas that of the Lower Cambrian shale ranges from 0.077 to 0.310mmol/g rock. These results are close to the sorption capacities of the Barnett (U.S.), Devonian–Mississippian (Western Canada), and Alum (Southern Scandinavia) shale samples. The shape of the sorption isotherms and methane sorption capacity vary from sample to sample. Under the measured pressure range, the isotherms of the selected immature AU Cambrian samples increase monotonously with pressure, whereas the overmature UYP samples exhibit maxima. The methane sorption capacity of the measured samples positively correlates with TOC content and exhibits a distinct linear relation. The TOC-normalised sorption capacity shows a positive correlation with thermal maturity; however, the corresponding pressure of maximum excess sorption and Langmuir pressure decrease substantially with increasin
ISSN:0016-2361
1873-7153
DOI:10.1016/j.fuel.2014.03.064