A New Model for Predicting Dynamic Surge Pressure in Gas and Drilling Mud Two-Phase Flow during Tripping Operations
Investigation of surge pressure is of great significance to the circulation loss problem caused by unsteady operations in management pressure drilling (MPD) operations. With full consideration of the important factors such as wave velocity, gas influx rate, pressure, temperature, and well depth, a n...
Gespeichert in:
Veröffentlicht in: | Mathematical problems in engineering 2014-01, Vol.2014 (2014), p.1-16 |
---|---|
Hauptverfasser: | , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | Investigation of surge pressure is of great significance to the circulation loss problem caused by unsteady operations in management pressure drilling (MPD) operations. With full consideration of the important factors such as wave velocity, gas influx rate, pressure, temperature, and well depth, a new surge pressure model has been proposed based on the mass conservation equations and the momentum conservation equations during MPD operations. The finite-difference method, the Newton-Raphson iterative method, and the fourth-order explicit Runge-Kutta method (R-K4) are adopted to solve the model. Calculation results indicate that the surge pressure has different values with respect to different drill pipe tripping speeds and well parameters. In general, the surge pressure tends to increase with the increases of drill pipe operating speed and with the decrease of gas influx rate and wellbore diameter. When the gas influx occurs, the surge pressure is weakened obviously. The surge pressure can cause a significant lag time if the gas influx occurs at bottomhole, and it is mainly affected by pressure wave velocity. The maximum surge pressure may occur before drill pipe reaches bottomhole, and the surge pressure is mainly affected by drill pipe operating speed and gas influx rate. |
---|---|
ISSN: | 1024-123X 1563-5147 |
DOI: | 10.1155/2014/916798 |