LIBS analysis of artificial calcified tissues matrices

In most laser-based analytical methods, the reproducibility of quantitative measurements strongly depends on maintaining uniform and stable experimental conditions. For LIBS analysis this means that for accurate estimation of elemental concentration, using the calibration curves obtained from reference samples, the plasma parameters have to be kept as constant as possible. In addition, calcified tissues such as bone are normally less “tough” in their texture than many samples, especially metals. Thus, the ablation process could change the sample morphological features rapidly, and result in poor reproducibility statistics. In the present work, three artificial reference sample sets have been fabricated. These samples represent three different calcium based matrices, CaCO3 matrix, bone ash matrix and Ca hydroxyapatite matrix. A comparative study of UV (266nm) and IR (1064nm) LIBS for these three sets of samples has been performed under similar experimental conditions for the two systems (laser energy, spot size, repetition rate, irradiance, etc.) to examine the wavelength effect. The analytical results demonstrated that UV-LIBS has improved reproducibility, precision, stable plasma conditions, better linear fitting, and the reduction of matrix effects. Bone ash could be used as a suitable standard reference material for calcified tissue calibration using LIBS with a 266nm excitation wavelength. ► UV-LIBS provide higher reproducibility than IR-LIBS for calcified sample calibration. ► UV-LIBS plasma conditions are more stable than IR-LIBS for calcified reference samples. ► UV-LIBS showed reduced matrix effects as shown from the stark broadening of Mg (I). ► Bone ash is a suitable standard for calcified tissue calibration using UV-LIBS.