A process for biodiesel production involving the heterotrophic fermentation of Chlorella protothecoides with glycerol as the carbon source

Oil-rich biomass has been produced from heterotrophic fed-batch and semi-continuous cultures of Chlorella protothecoides in conventional 2-L stirred-tank bioreactors (STBs). The process pH is controlled by injection of CO2 and pure glycerol is the main carbon source in the culture medium. Whereas a...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Applied energy 2013-03, Vol.103, p.341-349
Hauptverfasser: Cerón-García, M.C., Macías-Sánchez, M.D., Sánchez-Mirón, A., García-Camacho, F., Molina-Grima, E.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Oil-rich biomass has been produced from heterotrophic fed-batch and semi-continuous cultures of Chlorella protothecoides in conventional 2-L stirred-tank bioreactors (STBs). The process pH is controlled by injection of CO2 and pure glycerol is the main carbon source in the culture medium. Whereas a maximum biomass concentration of 64gL−1 was achieved in fed-batch mode, semi-continuous culture at a dilution rate of 0.2day−1 yielded the best average results, with biomass and saponifiable lipid (oil) productivities of 8.7 and 4.3gL−1day−1, respectively. Both operational modes resulted in a high saponifiable oil content (>35% of dry biomass), with the highest value (around 50% of dry biomass) being obtained in semi-continuous mode. The unsaponifiable lipid content was always less than 8% (of dry biomass). These results are superior to those reported in the literature for glycerol but practically identical to those achieved with glucose. The major fatty acids (FAs) in the saponifiable lipid fraction were oleic (C18:1), linoleic (C18:2), and palmitic (C16:0), which together accounted for around 89% of the total FA content. Oleic acid was the most abundant FA, accounting for >60% of total FAs. Biodiesel was obtained using a modified process based on transesterification of wet biomass paste, with a recovery of nearly 97%. The biodiesel obtained complies with the specifications defined in current standards (ASTM Biodiesel Standard D6751in US and Standard EN 14214 in EU).
ISSN:0306-2619
1872-9118
DOI:10.1016/j.apenergy.2012.09.054