Influence of generalized initial state and principal stress rotation on the undrained response of sands

The dependence of the undrained behaviour of sand on the initial stress state and the orientation of principal stresses with respect to the bedding planes is assessed under generalized loading paths using hollow cylinder torsional shear tests. The undrained tests were carried out using displacement-controlled loading to confidently capture the post-peak strain-softening response. Undrained behaviour of sands under identical initial states is shown to be dependent on the direction of principal stresses, during and prior to undrained shear, in relation to the direction of bedding planes. The minimum undrained strength of the strain-softening sand is found to be highly influenced by the initial stress state (confining stress, direction of principal stresses, and static shear), even though the friction angle mobilized at the instant of minimum strength is unique. A mere rotation of principal stresses at constant deviator stress alone can lead to a strain-softening response that may culminate in limited or unlimited flow deformation. The susceptibility of sand to liquefaction due to stress rotation increases as the direction of the major principal stress approaches the orientation of the bedding plane. The potential for flow deformation is strongly dependent on the direction of the major principal stress in relation to the bedding planes, and the steady state strength is not uniquely related to the void ratio alone.Key words: liquefaction, hollow cylinder torsion test, principal stress direction, static shear, steady state strength, minimum undrained strength.