Effects of hydraulic pressure on the performance of single chamber air-cathode microbial fuel cells

Scaling up of microbial fuel cells (MFCs) without losing power density requires a thorough understanding of the effect of hydraulic pressure on MFC performance. In this work, the performance of an activated carbon air-cathode MFC was evaluated under different hydraulic pressures. The MFC under 100mmH2O hydraulic pressure produced a maximum power density of 1260±24mWm–2, while the power density decreased by 24.4% and 44.7% as the hydraulic pressure increased to 500mmH2O and 2000mmH2O, respectively. Notably, the performance of both the anode and the cathode had decreased under high hydraulic pressures. Electrochemical impedance spectroscopy tests of the cathode indicated that both charge transfer resistance and diffusion transfer resistance increased with the increase in hydraulic pressure. Denaturing gradient gel electrophoresis of PCR-amplified partial 16S rRNA genes demonstrated that the similarity among anodic biofilm communities under different hydraulic pressures was ≥90%, and the communities of all MFCs were dominated by Geobacter sp. These results suggested that the reduction in power output of the single chamber air-cathode MFC under high hydraulic pressures can be attributed to water flooding of the cathode and suppression the metabolism of anodic exoelectrogenic bacteria. •Increasing hydraulic pressure reduces the power generation of MFCs.•Power density decrease is due to the performance decline in both cathode and anode.•High hydraulic pressure temporarily restrains the metabolism of anodic bacteria.•High hydraulic pressure raises cathodic charge transfer and diffusion resistances.