Simulation of the migration and transformation of petroleum pollutants in the soils of the Loess plateau: a case study in the Maling oil field of northwestern China

We developed a coupled water–oil simulation model to simulate the migration and transformation of petroleum-derived contaminants in the soil of the Xifeng oil field. To do so, we used the HYDRUS-2D model, which simulates the diffusion, adsorption or desorption, and microbial degradation of petroleum-derived hydrocarbons in the soil–water system. The saturated soil hydraulic conductivity of petroleum-derived pollutants was 0.05 cm day −1 , which is about 1 to 2 % of the soil moisture permeability coefficient. Our numerical simulation results show that spilled crude oil was mainly concentrated in the surface horizons of the soil. The organic pollutant concentration tended to be highest nearest to the pollution source. The pollutant migration was generally concentrated within the top 20 to 30 cm of the soil, with the maximum concentration in the top 5 cm of the soil. With passing time, the pollutant accumulation increased and the adsorption and degradation functions reached a dynamic balance with the input rate at depths greater than 30 cm below the soil surface. The oil-derived pollutants totaled 50 to 100 mg kg −1 under the dynamic balance condition, which occurred after 20 to 30 years. The petroleum-derived pollutant concentration in the loess soil was inversely correlated with the horizontal distance from the oil well, and the concentration decreased greatly at a distance greater than 40 m from the well.