Limitation of fluid flow at the Nankai Trough megasplay fault zone

Along the Nankai Trough megasplay fault off SE Japan, the effect of fluid migration on subduction-related seismogenesis and tsunamigenesis remains unresolved. To investigate the existence and role of fluid flow, a SmartPlug borehole observatory was installed at Site C0010 of the Integrated Ocean Drilling Program NanTroSEIZE Kumano transect, where a shallow branch of the fault was intersected and in situ fluid pressure monitored from August 2009 to November 2010. The tidal signal in the formation showed no phase shift relative to seafloor loading. The attenuation of 0.73 reflects the loading efficiency accurately, and enabled calculation of a formation compressibility of 1.0×10 –9 Pa –1 and a hydraulic diffusivity (HD) of 1.5×10 –5 m 2 s –1 . A similar HD is predicted by a tidal response model based on SmartPlug pressure data. By contrast, permeability measurements on intact samples from Site C0004 SE along-strike the splay fault and from Site C0006 in the frontal thrust zone were found to be similar and one magnitude smaller respectively, despite having a higher porosity. This is explained by the presence of fractures, which are covered by the larger scale of in situ measurements at Site C0010. Consequently, HD can be set to be at least 10 –5 m 2 s –1 for the splay fault and 10 –6 m 2 s –1 for the frontal thrust fault zone. Considering recent publications makes fluid flow at the splay fault unlikely, despite the presence of fractures. If the influence of fractures is limited, then processes leading to fault weakening may be enhanced.