Pseudo-remote reference processing of magnetotelluric data: a fast and efficient data acquisition scheme for local arrays

ABSTRACT The basic physical properties of the magnetic source field, namely its homogeneity and spatial coherence, have been used for a variety of magnetotelluric processing techniques including remote reference processing. In the present work we propose a data acquisition and processing technique for a large number of stations distributed over a localized area ideally on a grid. For pseudo‐remote reference processing it is necessary to use the following station setup: five‐component MT data are only measured at some sites (base stations) while at the majority of sites (local stations) only the electric and vertical magnetic fields are recorded. The impedance tensor and vertical magnetic transfer functions at each local station are computed by assigning the magnetic fields of a base station to the local station as if they had been measured there. This approach can lead to biased or erroneous estimates of local transfer functions at stations in the vicinity of strong conductivity contrasts that can be corrected using the interstation transfer functions between the horizontal magnetic fields measured at the base station(s). We test this approach with a data set collected in the vicinity of the Groß Schönebeck geothermal test site. Magnetotelluric data were collected at 146 local and 5 base stations distributed over an approximately 5 km × 25 km wide grid with site spacing ranging from 500 m × 500 m to 1000 m × 1000 m in the frequency range 128–0.001Hz. The obtained pseudo‐remote reference transfer functions are generally smooth and consistent and conductivity models obtained from 2D inversion of the data are in agreement with previous conductivity models from the study area.