Adsorption of copper, lead and cobalt by activated carbon

The phenomena of lead, copper and cobalt adsorption by activated carbon from aqueous solution was studied in detail. Laboratory studies were conducted to evaluate and optimize the various process variables (i.e. carbon type, solution pH, equilibrium time and carbon dose). A quantitative determination of the adsorptive capacity of activated carbon to remove these metals was also determined. Significant differences were found in the ability of different types of activated carbons to adsorb lead, copper and cobalt from aqueous solution. Solution pH was found to be the most important parameter affecting the adsorption. It was found that there was practically no adsorption of lead, copper and cobalt by activated carbon below a well defined solution pH value for each metal. This critical solution pH value was found to be lower than the pH value associated with the formation of hydrolysis products. Of the ten commercially available activated carbons evaluated in these experiments, Barney Cheney NL 1266 was found to adsorb the largest percentage of lead, copper and cobalt. The adsorption of any single metal (lead, copper and cobalt) was hindered by the presence of the other metals; the metals apparently competed for adsorption sites.