Anisotropic nature and scaling of thermally activated dissipation mechanism in Bi-2223 superconducting thin film

► Anisotropic nature of Bi-2223 film with the aid of the magnetotransport measurements. ► Effect of different crystalline directions on anisotropic behavior. ► Determination of the true magnetic field and temperature dependence of effective pinning energy in TAFF region. ► Analysis of 3D behavior of Bi-2223 film by peak temperature and classic theory of fluctuation. ► Superconducting properties of Bi-2223 film are dependent sensitively upon the field strength and direction. This study deals with the resistive transition of the c-axis oriented Bi-2223 thin film produced on the single crystal MgO (100) substrate using direct current (DC) magnetron reactive sputtering technique at 100watt in the case of applied field parallel and perpendicular to c-axis up to 3T, respectively. Peak temperature (Tp) of the sample studied is determined from the variation of dR/dT as a function of temperature plot when the resistance called as Rp at the Tp is deduced from the same curve. It is found that the superconducting translation (onset and offset critical) temperatures reduce with the increment of the applied magnetic field strength and direction. In fact the minimum onset (Tconset) value of 100.94K and offset (Tcoffset) value of 55.81K are observed for 3T applied field parallel to the c-axis. Moreover, the variation of ΔTc(Tconset-Tcoffset) value is found to increase with the enhancement of the field and direction. Similar to the critical transition temperature results, the maximum variation (45.14K) is observed for the sample in the applied field parallel to c-axis at 3T. Further, the results obtained show that the dissipative resistivity is well adapted to thermally activated flux motion below the Tp value under the magnetic field and so the Rp values observed are used to examine the temperature and field dependence (μ0H) of the flux pinning (activation) energy described as the formula U(T,μ0H)=U0(1-T/Tp(H))mH-α. According to results, while m value is calculated to be about 1.572 and 1.492, α value is found to be about 0.546 and 0.498 at H//ab and H//c-axis, respectively, confirming that not only does the film produced show 3D-like behavior but also the thermally activated flux flow is the dominant mechanism on the sample. Additionally, the irreversibility fields (Hirr), upper critical fields (Hc2), penetration depths (λ) and coherence lengths (ξ) are evaluated from the magnetoresistance curves. When the anisotropy ratio of γh=ξc/ξab is estimated to be about 6.42 at 0K