Improved dielectric and electrical insulating properties in Pb(Mg1/3Nb2/3)0.62Ti0.38O3 based multilayer ferroelectric thin films

The dielectric, ferroelectric, and electrical insulating properties of Pb(Mg1/3Nb2/3)0.62Ti0.38O3 thin film and Pb(Mg1/3Nb2/3)0.62Ti0.38O3–PbZr0.53Ti0.47O3 (PMNT–PZT) multilayer thin films including PMNT/PZT, PZT/PMNT and PZT/PMNT/PZT prepared on LaNiO3/SiO2/Si substrates were investigated. It is found that the PMNT based multilayer films show larger dielectric constant and lower dielectric loss compared with the monolayer PMNT film. Moreover, the multilayer thin films exhibit little temperature dependence of dielectric properties over a broad temperature range from 30 to 270°C. In addition, well saturated polarization-versus-electric field hysteresis loops with large spontaneous polarization of 22.2–23.9μC/cm2 for the multilayer films are obtained due to their good electrical insulating properties. The leakage current densities in the multilayer films are about three orders of magnitude lower than those in the monolayer PMNT thin film under electric field E>70kV/cm. We argue that the reduction of the leakage current densities is mainly attributed to the formation of a depletion zone/layer between layers by incorporating layers of PZT in multilayer structures acting as a potential barrier for free carriers to transport as well as carrier scattering at interfaces supported by the measurements on dielectric and electrical insulating properties. The results demonstrate that the multilayered thin films exhibit enhanced dielectric, ferroelectric and electrical insulating properties for ferroelectric memory devices. ► Highly (110) preferred oriented multilayer films were prepared on LaNiO3/SiO2/Si. ► Enhanced dielectric and electrical insulating properties are achieved. ► The multilayer films exhibit well saturated P–E loops with large Pr values. ► The leakage current densities are about 10−7A/cm2 at E=200kV/cm.