Full field measurements of anisotropic stress intensity factor ranges in fatigue
► Mixed mode fatigue crack growth in single crystals was analyzed. ► An anisotropic algorithm to find effective stress intensity factors was written. ► The effects of anisotropy on plastic zone sizes and shapes were studied. ► Crack tip slip irreversibility was measured and increased with crack leng...
Gespeichert in:
Veröffentlicht in: | Engineering fracture mechanics 2012-11, Vol.94, p.13-28 |
---|---|
Hauptverfasser: | , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | ► Mixed mode fatigue crack growth in single crystals was analyzed. ► An anisotropic algorithm to find effective stress intensity factors was written. ► The effects of anisotropy on plastic zone sizes and shapes were studied. ► Crack tip slip irreversibility was measured and increased with crack length.
The effects of anisotropy during mixed mode fatigue crack growth were studied in single crystal 316L stainless steel. An anisotropic least-squares regression algorithm using displacements from digital image correlation was developed to find the effective stress intensity factors, KI and KII, and the T-stress. Crack tip plastic zones were determined using an anisotropic yield criterion. Strains in the plastic zone obtained from digital image correlation showed a dependence on the crystallography and load ratio. Crack tip slip irreversibility was measured and showed an increasing trend with increasing crack length; this information is critical for describing crack growth behavior. |
---|---|
ISSN: | 0013-7944 1873-7315 |
DOI: | 10.1016/j.engfracmech.2012.06.002 |