Hazards of mechanized tunnel excavation in H sub(2)S bearing ground in Aspar tunnel, Iran
Occurrence of hydrogen sulfide gas (H sub(2)S) is one of the most important engineering geological hazards during tunneling. Its hazards and consequent challenges are very difficult and costly to solve. During site investigation, one of the tasks for engineering geologists is prediction and evaluati...
Gespeichert in:
Veröffentlicht in: | Environmental earth sciences 2012-05, Vol.66 (2), p.529-535 |
---|---|
Hauptverfasser: | , , , , |
Format: | Artikel |
Sprache: | eng |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | Occurrence of hydrogen sulfide gas (H sub(2)S) is one of the most important engineering geological hazards during tunneling. Its hazards and consequent challenges are very difficult and costly to solve. During site investigation, one of the tasks for engineering geologists is prediction and evaluation of the risk of H sub(2)S gas in the underground spaces. In this study, water conveyance tunnel of Aspar, which was excavated in H sub(2)S-bearing environments, is discussed. The tunnel is excavated in the hydrocarbon formations. Applied experiments suggest that geological formations pertaining to hydrocarbon resources are crucial in formation and reservation of H sub(2)S gas. This paper briefly discusses hazards and geological sources of H sub(2)S, as well as remedial measures for decreasing the risks and problems in excavation of the tunnel. To predict the risk of H sub(2)S gas in the underground spaces, it is possible to use some precursors such as: sulfur springs, organic traces, organic argillaceous rocks, exposure of H sub(2)S odor from fresh surface of rock and smell of H sub(2)S during boreholes drilling. Controlling the inflow of groundwater into the excavation, diluting the concentration of H sub(2)S, training the personnel and utilization of some proper safety equipment have been used to mitigate risks and problems in tunnel excavation. |
---|---|
ISSN: | 1866-6280 1866-6299 |
DOI: | 10.1007/s12665-011-1262-y |