The characteristics of transparent conducting Al-doped zinc oxide thin films deposited on polymer substrates

Al-doped zinc oxide (AZO) transparent, conductive thin films were deposited on inexpensive polyethylene terephthalate substrates, using radio frequency (rf) magnetron sputtering, with an AZO ceramic target (the Al 2 O 3 content is approximately 2 wt%). This paper presents an effective method for the optimization of the parameters for the deposition process for AZO thin films with multiple performance characteristics, using the Taguchi method, combined with grey relational analysis. Using the Taguchi quality design concept, an L 9 orthogonal array was chosen for the experiments. The effects of various process parameters (rf power, substrate-to-target distance, substrate temperature and deposition time) on the electrical, structural, morphological and optical properties of AZO films were investigated. In the confirmation runs, using grey relational analysis, the electrical resistivity of the AZO films was found to have decreased from 5.0 × 10 −3 to 1.6 × 10 −3 Ω-cm and the optical transmittance was found to have increased from 74.39 to 79.40%. The results demonstrate that the Taguchi method combined with grey relational analysis is an economical way to obtain the multiple performance characteristics of AZO films with the fewest experimental data. Additionally, by applying an Al buffer layer, of thickness 10 nm, the results show that the electrical resistivity was 3.1 × 10 −4 Ω-cm and the average optical transmittance, in the visible part of the spectrum, was approximately 79.12%.