High quality p-type N-doped AZO nanorod arrays by an ammonia-assisted hydrothermal method

High quality Al–N co-doped ZnO (AZO:N) nanorods were synthesized using an ammonia-assisted hydrothermal method. The AZO:N nanorods exhibited p-type characteristics according to Hall Effect measurements, revealing low resistivity in the order of 10−2Ωcm. At room temperature, the electrical properties of the AZO:N nanorod showed a hole concentration, hole mobility and resistivity of 2.83×1018–2.28×1019cm−3, 2.19–2.86cm2/Vs, and 1.01–9.58×10−2Ωcm, respectively. The I–V measurements of the p–n junction (p-AZO:N nanorods/n-Si) showed rectifying I–V characteristics, confirming that these AZO:N nanorods exhibit p-type conductivity. This study opens the possibility of developing highly conducting p-type AZO nanorods for optoelectronic devices. The effect of the ammonia concentration on the structural and electrical properties of AZO:N nanorods is discussed. [Display omitted] ► N-doped p-type AZO nanorods were first prepared by hydrothermal growth. ► AZO:N nanorods showed highest aspect ratios~60. ► p-type conductivity was achieved by ammonia-assisted hydrothermal growth. ► p–n junction (p-AZO:N/n-Si) revealed rectifying I–V characteristics.