Breath figures method to control the topography and the functionality of polymeric surfaces in porous films and microspheres

Polymeric films with porous structures and microsphere patterns were prepared by the method of breath figures, mixing poly(methyl methacrylate) (PMMA) and amphiphilic copolymers containing glucose moieties in their structure, glycopolymers. Statistical and block glycopolymers were used in a proportion of 10 wt %. The statistical glycopolymers were synthesized via conventional free radical copolymerization, whereas the block copolymer of methyl methacrylate and 2‐{[(D‐glucosamin‐2‐Nyl) carbonyl]oxy}ethyl methacrylate, PMMA‐b‐PHEMAGl, was obtained by atom transfer radical polymerization. Glycopolymers were blended with a high molecular weight PMMA matrix and dissolved in a mixture of tetrahydrofuran and a small amount of water. Results showed that, depending on experimental conditions (water content, humidity, and type of copolymer), the observed final film morphology changes significantly. Thus, films with honeycomb pattern structures, spherical particles, or a mixture of both were obtained. In addition, polar glucose moieties were oriented principally either inside of the pores in the case of films and towards the surface in the case of particles. The specific surface bioactivity of these materials was examined using the specific lectin concanavalin A conjugated with fluorescein, Con A‐FITC. The successful binding of the Con A was demonstrated by fluorescence microscopy being more intense at the surface of the pores and of the particles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012 Polymeric films with either porous structures or microsphere patterns were prepared by the method of breath figures, mixing high molecular weight PMMA and amphiphilic copolymers containing glucose moieties in their structure, glycopolymers. Films with honeycomb pattern structures, spherical particles, or a mixture of both were obtained by evaporation under controlled ambient conditions. In addition, polar glucose moieties were oriented principally either inside of the pores in the case of films and toward the surface in the case of particles.