Adsorption of BTEX on Surfactant Modified Granulated Natural Zeolite Nanoparticles: Parameters Optimizing by Applying Taguchi Experimental Design Method

In this paper, a novel adsorbent developed by means of granulating of natural zeolite nanoparticles (i.e., clinoptilolite) was evaluated for possible removal of the petroleum monoaromatics (i.e., benzene, toluene, ethylbenzene, and xylene, BTEX). To do this, the natural zeolite was ground to produce nanosized particulate, then modified by two cationic surfactants and granulated. The effect of various parameters including temperature, initial pH of the solution, total dissolved solids (TDS), and concentration of a competitive substance (i.e., methyl tert‐butyl ether, MTBE) were studied and optimized using a Taguchi statistical approach. The results ascertained that initial pH of the solution was the most effective parameter. However, the low pH (acidic) was favorable for BTEX adsorption onto the developed adsorbents. In this study, the experimental parameters were optimized and the best adsorption condition by determination of effective factors was chosen. Based on the S/N ratio, the optimized conditions for BTEX removal were temperature of 40°C, initial pH of 3, TDS of 0 mg/L, and MTBE concentration of 100 µg/L. At the optimized conditions, the uptake of each BTEX compounds reached to more than 1.5 mg/g of adsorbents. Natural zeolite nanoparticles were produced mechanically, formed as granule, and finally modified by cationic surfactant to develop new sorbents for BTEX uptake. The results revealed that these nanosized clinoptilolite exhibit increased adsorption capacity and they are capable to adsorb BTEX molecules regardless of the presence of interfering compounds such as TDS and MTBE.