Modified mesoporous silica materials for on-line separation and preconcentration of hexavalent chromium using a microcolumn coupled with flame atomic absorption spectrometry

[Display omitted] ► A modified SBA-15 mesoporous silica material (NH2-SBA-15) was synthesized as sorbent. ► The material was used for the first time in a flow injection on-line solid phase extraction (SPE) coupled with flame atomic absorption spectrometry (FAAS) to detect trace Cr (VI). ► The NH2-SBA-15 enables retain Cr (VI) with an enrichment factor of 44. ► The micro-column of NH2-SBA-15 underwent more than 100 adsorption/desorption cycles. A modified SBA-15 mesoporous silica material NH2-SBA-15 was synthesized successfully by grafting γ-aminopropyl-triethoxysilane. The material was characterized using transmission electron microscopy (TEM) and Fourier transform infrared/Raman (FT-IR/Raman) spectroscopy, and used for the first time in a flow injection on-line solid phase extraction (SPE) coupled with flame atomic absorption spectrometry (FAAS) to detect trace Cr (VI). Effective sorption of Cr (VI) was achieved at pH 2.0 with no interference from Cr (III) and other ions and 0.5molL−1 NH3·H2O solution was found optimal for the complete elution of Cr (VI). An enrichment factor of 44 and was achieved under optimized experimental conditions at a sample loading of 2.0mLmin−1 sample loading (300s) and an elution flow rate of 2.0mLmin−1 (24s). The precision of the 11 replicate Cr (VI) measurements was 2.1% at the 100μgL−1 level with a detection limit of 0.2μgL−1 (3s, n=10) using the FAAS. The developed method was successfully applied to trace chromium determination in waste water. The accuracy was validated using a certified reference material of riverine water (GBW08607).