Interference Mitigation Capability of a Low Duty DS-Multiband-UWB System in Realistic Environment

In this paper, the performance of a low duty factor (DF) hybrid direct sequence (DS) multiband (MB)-pulsed ultra wideband (UWB) system is evaluated over realistic propagation channels to highlight its capability of interference mitigation. The interference mitigation techniques incorporated in the DS-MB-UWB system is a novel design that includes the utilization of the frequency-agile multiple sub-band configuration and the coexistence-friendly low DF signaling. The system design consists of a Rake type receiver over multipath and multi-user channel in the presence of a coexisting narrowband interferer. The propagation channels are modeled based on actual measurement data. Firstly, by suppressing the power in the particular sub-band coexisting with the narrowband signal, performance degradation due to narrowband interference can be improved. It is observed that by fully suppressing the sub-band affected by the narrowband signal, a typical 1-digit performance improvement (e.g. BER improves from 10-3 to 10-4) can be achieved. Secondly, by employing lower DF signaling, self interference (SI) and multi-user interference (MUI) can be mitigated. It is found that a typical 3dB improvement is achieved by reducing the DF from 0.5 to 0.04. Together, the sub-band power suppression and low DF signaling are shown to be effective mitigation techniques against environment with the presence of SI, MUI and narrowband interference.