Bond Wire Antenna/Feed for Operation Near 60 GHz

A bond wire antenna/feed for use near 60 GHz is demonstrated. A gold bond wire with ~1-mil diameter is co-optimized with a bond pad to resonate at ~60 GHz. With a metal cover representing an enclosure for an electronic system (2 mm from a printed circuit board), the antenna pair gain at 10-cm separa...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:IEEE transactions on microwave theory and techniques 2009-12, Vol.57 (12), p.2966-2972
Hauptverfasser: Hsin-Ta Wu, Tekle, M., Nallani, C.S., Ning Zhang, Kenneth, K.O.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:A bond wire antenna/feed for use near 60 GHz is demonstrated. A gold bond wire with ~1-mil diameter is co-optimized with a bond pad to resonate at ~60 GHz. With a metal cover representing an enclosure for an electronic system (2 mm from a printed circuit board), the antenna pair gain at 10-cm separation is ~ -53 dB including the effects of two nearby bond wires located 300 ¿m away. This is sufficient for building an interchip 1-Gbps radio link with bit error rate of 10 -12 . Without the metal cover, the range is reduced to ~ 4-5 cm. The bond wire antennas with efficiency of ~30% should also be useful for general purpose over the air communication in the 60-GHz unlicensed band.
ISSN:0018-9480
1557-9670
DOI:10.1109/TMTT.2009.2033836