An investigation on the correlation between rheology and morphology of nanocomposite foams based on low-density polyethylene and ethylene vinyl acetate blends

This article presents the correlation between rheology and morphology of nanocomposite foams of low‐density polyethylene (LDPE), ethylene vinyl acetate (EVA), and their blends. LDPE/EVA nanocomposites were prepared via melt mixing and then foamed using batch foaming method. To assess the rheological behavior of polymer melts, frequency sweep and creep recovery tests were done. Morphology of the samples was also studied by scanning electron microscopy and X‐ray diffraction. The results showed that with increase in clay content, storage modulus, complex and zero shear viscosities will be increased, which affect the foam morphology. In addition, elasticity plays an important role in foaming process, in a way that samples with more elasticity percentage have the highest cell density and the lowest cell size. POLYM. COMPOS., 31:1808–1816, 2010. © 2010 Society of Plastics Engineers.