On the feasibility of retrieving the temporal gravity field via improved optical clocks

The development of optical clocks has experienced significant acceleration in recent years, positioning them as one of the most promising quantum optical sensors for next-generation gravimetric missions (NGGMs). This study investigates the feasibility of retrieving the temporal gravity field via improved optical clocks through a closed-loop simulation. It evaluates optical clock capabilities in temporal gravity field inversion by considering the clock noise characteristics, designing satellite formations, and simulating the performance of optical clocks. The results indicate that optical clocks exhibit higher sensitivity to low-degree gravity field signals. However, when the optical clock noise level drops below 1 × 10 −19 / τ (τ being the averaging time in seconds) in the satellite-to-ground (SG) mode or below 1 × 10 −20 / τ in the satellite-to-satellite (SS) mode, atmospheric and oceanic (AO) errors become the dominant source of error. At this noise level, optical clocks can detect time-variable gravity signals up to approximately degree 30. Compared to existing gravity measurement missions such as GRACE-FO, optical clocks exhibit consistent results in detecting signals below degree 20. If the orbital altitude is reduced to 250 km, the performance of optical clocks across all degrees aligns with the results of GRACE-FO. Furthermore, the study reveals that lowering the orbital altitude of satellite-based optical clocks from 485 to 250 km improves results by an average of 33%. Switching from the SS mode to the SG mode results in an average improvement of 51%, while each order-of-magnitude improvement in clock precision enhances results by an average of 60%. In summary, these findings highlight the tremendous potential of optical clock technology in determining Earth’s temporal gravity field and provide crucial technological support for NGGMs.