Optimization of LPCVD Deposition Conditions of Silicon-Rich Silicon Nitride to Obtain Suitable Optical Properties for Photoluminescent Coating

Silicon nitride is a commonly used material for ceramic applications and in the fabrication processes of integrated circuits (ICs). It has also increased in interest from the scientific community for use as a functional coating due to its physical, mechanical, electrical, and optoelectronic properti...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Coatings (Basel) 2024-11, Vol.14 (11), p.1383
Hauptverfasser: Uribe González, Francisco, Monfil Leyva, Karim, Moreno Moreno, Mario, Morales Sánchez, Alfredo, Muñoz Zurita, Ana L., Luna López, José A., Carrillo López, Jesús, Hernández de la Luz, José A. D., Salazar Valdez, Alma S. L.
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:Silicon nitride is a commonly used material for ceramic applications and in the fabrication processes of integrated circuits (ICs). It has also increased in interest from the scientific community for use as a functional coating due to its physical, mechanical, electrical, and optoelectronic properties. In particular, silicon-rich silicon nitride (SRSN) has been considered in the photovoltaic industry as a down-conversion film for solar cells. In this work, SRSN films have been obtained by the Low-Pressure Chemical Vapor Deposition (LPCVD) technique at low to moderate deposition temperatures with a variation in the precursor gas pressure ratio. The SRSN films showed a wide photoluminescence (PL) in the visible region (without a high-deposition temperature or annealing process) and suitable optical properties (refractive index and absorption in the UV) to be used as photoluminescent coating on silicon solar cells. The absence of high-deposition temperatures could preserve the original structure of silicon solar cells, once the SRSN layer was applied. In addition, control of the reactive gas pressure ratio and deposition temperature showed an influence on the refractive index, the surface roughness, and the PL emission.
ISSN:2079-6412
2079-6412
DOI:10.3390/coatings14111383