A 28GHz balun‐first LNA with db‐linear 32db gain range for 5G applications

This letter presents a 28 GHz balun‐first low noise amplifier (LNA) featuring a wide dB‐linear variable gain range. The architecture of LNA includes three‐stage cascode amplifiers. An integrated balun at the input stage provides RF ESD protection and converts a single‐ended signal to a differential one (S‐to‐D). A transformer‐based dual‐resonant matching network is designed and analyzed to achieve wideband performance. To realize a continuous dB‐linear variable gain range and consistent input/output matching, gain control is implemented in the second stage using a 5‐bit digital‐to‐analog converter (DAC) for a 32 dB gain range. The DAC can generate a nonlinear analog voltage to control the gate of the common‐gate transistor in the second cascode stage, inversely compensating for the nonlinear gain variations of the cascode amplifier. The LNA is fabricated in 65‐nm CMOS process with a core size of 0.154 mm². Measurement results exhibit a maximum gain of 33.5 dB and a minimum noise figure (NF) of 3.65 dB with a 3‐dB bandwidth of 23–29.5 GHz. The measured variable gain range is approximately 32 dB across 32 different gain states, with a linear gain step of ~1 dB per state and an IP1dB ranging from −6.5 dBm to −35.25 dBm. The power consumption is 35.4–48 mW from a 1.2 V supply voltage.