Influence of chemical composition and hot rolling modes on the strength level of hot-rolled steel grade similar to S355MC

Presently, the main trend in thin-sheet steel production, including the high-strength automobile steel, is to reduce production costs while retaining essential properties and quality. A considerable part of the cost of high-strength steel comes from alloying with expensive chemical elements such as vanadium and niobium. Simply reducing the content of these elements in finished products would compromise the mechanical properties of rolled products, leading to inferior quality and defects. This work, based on statistical analysis for steel grade S355MC, demonstrated the potential to reduce alloying while maintaining the required yield strength by adjusting the hot rolling conditions. It was also revealed that, in addition to the concentration of chemical elements and the hot rolling mode, the thickness of the finished product affects the tensile strength. Therefore, the analysis was performed exclusively on products with a thickness of 4 mm. The study resulted in a regression equation that illustrates the dependence of yield strength on vanadium content and hot rolling parameters.