Surface and interface chemistry of bromine–methanol‐etched Cd0.9Zn0.1Te crystals

Chemical polishing or chemo‐mechanical polishing is crucial as a last step of surface preparation to remove the damaged layer and contaminants from the surface of CdZnTe crystals. The bromine–methanol solution is widely used for this purpose. However, bromine–methanol solution enriches the surface with Te and results in poor performance of CdZnTe crystals. In this study, the effect of the chemical polishing with 5% bromine–methanol solution on the surface and at the interface is investigated and it is demonstrated that etching duration strongly influences surface stoichiometry and interface contaminants. The evolution of the surface topography with etching and chemical changes are presented. It is shown that after 90 s etching/polishing, subsurface damage is removed and Te enrichment is minimum. Moreover, interface layer thickness is the smallest for 90 s etching duration. It is presented that further increase in the etching duration disturbs the surface stoichiometry and interface depth. It also calculated that 90 s of etching shows low interface barrier and symmetrical current–voltage curve.