Growth characteristics of the mean shear layer in pipe bends with and without a guide vane

The growth characteristics of two identical pipe bends with and without a guide vane are investigated by means of large eddy simulation. The two pipe bends, with a radius of curvature slightly above the separation threshold, are subjected to two fully developed upstream flow conditions, with a corresponding Reynolds number of 11 700 and 24 000. A precursor computation method is employed to provide the fully developed turbulence inflow conditions for all cases. The growth of the mean shear layer in this work is characterized by the local momentum thickness, which measures the extent of momentum deficit confined under the mean shear layer. For both pipe bends, the initial growth of momentum thickness is observed in the first quarter of the bend. The onset location is almost independent of the Reynolds numbers. However, a clear Reynolds number dependence is observed in the onset magnitude, which strongly defines the growth rate thereafter. By examining the mean momentum balance in the bend section, the results show that rather than the adverse pressure gradient, the overall growth characteristics of the mean shear layer, which include the onset location and the growth rate, are better described by the balance between the centrifugal force and the radial pressure gradient. This balance manifests itself as a change in the swirling intensity of the secondary flow. The presence of guide vane significantly suppresses the swirling intensity in the bend section, leading to a noticeable reduction in the overall momentum thickness growth and the production of turbulence in the flow downstream of the bend. Further inspection also indicates that the initial mechanism leading to the suppression of separation at the inner bend is linked to the increasing dominance of the small vortices at the near-wall vicinity relative to the local adverse pressure gradient. Certain aspects pertaining to the turbulent statistics are also discussed.