Estimating Sludge Deposition on the Heat Exchanger in the Digester of a Biogas Plant

The presented research addresses a problem occurring in a biogas plant, which we know plays an important role in sustainable development. The sludge deposited on the walls of the digester’s heat exchanger impairs heat transfer to the substrate. It leads to a temperature drop inside the biogas plant...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Sustainability 2024-09, Vol.16 (18), p.7981
Hauptverfasser: Teleszewski, Tomasz Janusz, Hożejowski, Leszek
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The presented research addresses a problem occurring in a biogas plant, which we know plays an important role in sustainable development. The sludge deposited on the walls of the digester’s heat exchanger impairs heat transfer to the substrate. It leads to a temperature drop inside the biogas plant and threatens its correct operation. The thickness of the sludge layer cannot be directly measured when the plant is operating. Therefore, the aim of this work was to develop and then validate a method for estimating, based on the operating parameters of the exchanger, the thickness of the sludge layer and to give theoretical foundations for designing an automatic sludge monitoring system. Two mathematical models (and methods) were developed: one- and two-dimensional. The former model was solved analytically while the latter by the Trefftz method. The numerical results from these two approaches showed very good agreement with each other and with the actual measurement taken directly after removing the substrate from the fermentation chamber. According to the calculation results, the growth of the sludge layer was linear with time, and its rate was 0.0064 mm per day. Finally, a schematic diagram of an intended sludge monitoring system was proposed. It could optimize biogas plant operation and thus become a step towards more sustainable energy production.
ISSN:2071-1050
2071-1050
DOI:10.3390/su16187981