Factors Affecting the Cut Width in the Wire-Cut Electrical Discharge Machining of VV751P Heat-Resistant Nickel Alloy

Factors Affecting the Cut Width in the Wire-Cut Electrical Discharge Machining of VV751P Heat-Resistant Nickel Alloy

The wire-cut electrical discharge machining of VV751P heat-resistant nickel alloy is considered. An empirical model is formulated to describe the influence of the machining conditions and the workpiece thickness on the cut width. On the basis of the results obtained, the required accuracy may be obt...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Russian engineering research 2024, Vol.44 (7), p.1014-1016
Hauptverfasser: Khairulin, V. T., Ablyaz, T. R., Shlykov, E. S., Blokhin, V. B., Muratov, K. R.
Format: Artikel
Sprache:eng
Schlagworte:
Cut width
Electric discharge machining
Electrical resistance
Engineering
Engineering Design
Heat resistant alloys
Nickel base alloys
Wire
Workpieces
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The wire-cut electrical discharge machining of VV751P heat-resistant nickel alloy is considered. An empirical model is formulated to describe the influence of the machining conditions and the workpiece thickness on the cut width. On the basis of the results obtained, the required accuracy may be obtained in machining VV751P alloy components.
ISSN:1068-798X
1934-8088
DOI:10.3103/S1068798X24701387