Modular Open Chamber Stand for Biomass Densification Using the Example of Miscanthus × Giganteus Greef Et Deu

This article presents a modular open chamber stand which simulates the densification process that occurs in a single channel of a pelletising die. The results of the verification tests confirmed the suitability of this stand for determining the optimal geometry of the channel. The test material was...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Sustainability 2024-01, Vol.16 (16), p.7123
Hauptverfasser: Styks, Jakub, Wróbel, Marek
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:This article presents a modular open chamber stand which simulates the densification process that occurs in a single channel of a pelletising die. The results of the verification tests confirmed the suitability of this stand for determining the optimal geometry of the channel. The test material was the biomass of Miscanthus × giganteus which is considered to be a difficult material for pressure densification; therefore, it was decided that it would be a good material for verifying the stand. The stand consists of four modules: an introductory section with a diameter of D = 12 and 10 mm, a conical part with an angle of α = 10°, 20°, 30°, 40°, a cylindrical part with lengths L = 5, 15, 25, 35, 45 mm and diameter d= 8 mm and a pellet receiving module. The stand is able to heat the densification channel. Individual modules can be assembled into test combinations; this results in a change in channel geometry without the necessity to manufacture many singular channels. The optimum geometry of the channel for miscanthus with a moisture content of 13%, densified at 100 °C was determined. It should be a channel with D = 10 mm, α = 40° and L = 18 mm.
ISSN:2071-1050
DOI:10.3390/su16167123