The change of the absorptance at the transition from partial- to full-penetration laser welding

Full-penetration laser welding processes are necessarily associated with significant changes of the geometrical properties of the keyhole at the beginning of the process when the keyhole expands all the way through the workpiece and finally pierces the bottom of the sheet. The impact that this transition has on the absorptance was investigated by means of X-ray imaging to determine the geometry of the keyhole and subsequent raytracing to calculate the distribution of the absorbed irradiance. The results show a significant drop of the overall absorptance when the bottom of the capillary opens through the rear side of the workpiece which in practice is noticed by an unstable behavior of the keyhole. Since the drop of the absorptance is less pronounced for smaller diameters of the keyhole, one may recommend the application of laser beams with small diameters at least during the initial phase until the keyhole is fully developed and reliably reaches through the bottom surface of the welded sheet.