Modernization of the tread extrusion head of the MCH-200 screw machine

Modernization of the tread extrusion head of the MCH-200 screw machine

The hydrodynamics of the existing basic extrusion head of the MCH-200 screw machine were calculated using ANSYS. Pin extrusion was proposed for head modernization. A new simpler head design was developed using the directional search method. When comparing data on the distribution of material flow ra...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Chemical and petroleum engineering 2023-11, Vol.59 (7-8), p.603-608
Hauptverfasser: Dolgin, D. S., Gudanov, I. S., Lavrentiev, Yu. B., Lebedev, A. E., Ekimov, Ya. V.
Format: Artikel
Sprache:eng
Schlagworte:
Chemistry
Chemistry and Materials Science
Extrusion
Fluid dynamics
Fluid flow
Geotechnical Engineering & Applied Earth Sciences
Industrial Chemistry/Chemical Engineering
Industrial Pollution Prevention
Mineral Resources
Modernization
Screw machines
Tires
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Beschreibung
Zusammenfassung:The hydrodynamics of the existing basic extrusion head of the MCH-200 screw machine were calculated using ANSYS. Pin extrusion was proposed for head modernization. A new simpler head design was developed using the directional search method. When comparing data on the distribution of material flow rates for the basic and new head designs, the efficiency of pin insertion into the extrusion head was determined.
ISSN:0009-2355
1573-8329
DOI:10.1007/s10556-024-01280-2