Zinc Extraction from Primary Lead Smelting Slags by Oxidant Alkaline Leaching

The purpose of this work is to obtain the optimum conditions for leaching the zinc contained in an industrial lead smelting slag. In this type of slag, zinc oxide, sulfide, and ferrite are contained. Zinc extraction from these compounds consists of using a single aqueous medium, where oxidant alkaline leaching with NaOH and NaClO was used. The parameters evaluated during the experiment were as follows: percentage of solids, NaOH/NaClO ratio, and temperature. The maximum amount of recovered Zn obtained during the leaching was 58%. This percentage was achieved by using the following optimal conditions: temperature of 60 °C, 0.22 of NaOH/NaClO ratio, 10% of solids, and a reaction time of 40 min. The calculated values of activation energy confirmed that the rate-limiting step of the reaction using the decreasing particle model is diffusion. The maximum percentage of zinc obtained could only have been achieved if the zinc oxide and part of the zinc sulfide (both present in almost equal proportions in the sample) were leached into the alkaline aqueous medium in the presence of NaClO.