Mass Transfer of H2S and O2 in Falling Sewage: Contributions via Droplets, Jet, and Bottom Pool

AbstractIn urban drainage systems, falling sewage in drop structures expedites the mass transfer of hydrogen sulfide (H2S) and oxygen (O2). This process is important for sewer odor and corrosion control; however, direct experiments and relevant knowledge are limited. This study conducted laboratory experiments using two typical forms of falling sewage: free-falling jet and attached-falling jet. The results show that mass transfer coefficient KL and concentration deficit ratio r (the ratio of upstream-to-downstream gas concentration deficiency) increase with an increase of sewage drop height (0.2–1.4 m) and with a decrease of flow rate (0.9–2.0 L/min). Nonlinear correlations between r and the hydraulic parameters were proposed. The free-falling jet contributed about 40% more mass transfer than the attached-falling jet. The mass transfer rate in free-falling drop structures of this study was 3–13 times that in gravity sewers without drop structures. In addition, O2 is an appropriate surrogate gas for studying H2S mass transfer. Finally, the mass transfer of O2 in a prototype drop structure was estimated: if the drop height is 6 m, falling droplets are the main (>80%) contributor. This study provides a tool for estimating the mass transfer in drop structures, which can optimize the design of drop structures to control sewer odor and pipe corrosion.